• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

The key fob to be programmed by an automotive locksmith or a Subaru dealer, depending on how old your Subaru is. This is done by connecting a computer machine to your car.

To program your Subaru, start by unlocking the driver's doors using the door button control, then close it. You will hear a chime from the instrument panel and the dome lights will flash.

Step 1: Find the Transmitter Circuit Board

There are many ways to program your keyfob. First, you should know which kind of key fob you have. You can determine this by inspecting the shape of the key fob or by listening to your car's sound.

Once you have the information you require, you can start the process of programming your key fob from home. You'll require an aluminum flathead and a key for this. Open the key fob case by twisting it. Then, push the metal key into the case and remove the battery from the small tabs that hold it in place. Replace the battery with a fresh one and put the key fob case back together.

Step 2: Remove the key fob case

Change the battery is a smart idea as it could revive key fobs that aren't functioning no longer. However, there are cases where the buttons in the key fob could be damaged. If you notice that the contacts made of metal on the button have come loose Try soldering them into place again in order to make them function once more.

Before you begin the process, ensure that your car's doors are shut and the ignition is off. Close the driver's door and then press your door button 10 times in rapid succession. Then, you should hear the instrument panel chime and your dome lights should flash. This means you're ready proceed.

Step 3: Put the Key Fob in the ignition

Many online articles will tell you how to program your new or replacement subaru key locked in car keyfob at home. However, most of them don't provide precise instructions. Reprogramming an electronic key is best done by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your subaru key fob replacement near me with the engine turned off and all doors closed. Use the door button control and use it to unlock all doors. Open and close the driver's doors two more times. Insert and remove the ignition key (don't rotate it) 10 times over 40 seconds. The system should sound chirps to confirm that the settings have been changed.

Step 4 Step 4: Switch on the ignition

It is crucial to note that this method of programming a key fob only works if you already have a functioning key. If you don't you can find an auto-locksmith or dealer who will have to program keys for your Subaru Fort Bliss.

After the key is programmed, it will be able to start your vehicle within five seconds. Start by closing the doors and then shutting off the engine. Then, sit in the driver's chair and unlock all doors with the door button control. Put the key into the ignition and turn it to its first position. The electrical systems will be activated but the engine will remain off. Repeat this procedure ten times.

Step 5 Step 5: Unlock the Driver's Door

Subaru offers a variety of premium cars equipped with key fobs that lock and unlock doors and even start the car and defrost the windows. However, there are times when these devices do not function properly.

To resolve this issue, you should contact an auto locksmith or dealer. This will resolve the issue and ensure that your vehicle is secure.

It is necessary to first open and close the driver's door. Then, put the ignition key in and move it to the first position. Then, return it to the off position. Do this as fast as you can ten times. After the tenth repetition, you should hear an audible chime.

Step 6: Press the Lock/Unlock Button on the Driver's Door

The process of replacing the battery in the Subaru remote key fob is simple. The first step is to open the exterior fob casing. Then, use the flathead screwdriver open the interior case and then remove the battery.

After removing the battery then replace it with a new one. Close the case. Sit in the driver's chair and then unlock all doors by using the door button control. Place the key in ignition and turn the key so that the electric system is on, however the engine remains off. Repeat this ten times in succession until you hear the chime on the instrument panel. This will put the system in programming mode.

Step 7 Step 7: Press the Lock/Unlock Button on the Passenger's Door

For some people, the annoying sound heard when locking or unlocking the subaru replacement key fob key fob from outside the vehicle may become distracting. In some instances the chirp may be removed by closing and opening all doors and a double click of the lock button on the key fob.

Close all doors including the fuel-filler lid and turn off the ignition. For 10 seconds, press and hold the lock button on the key fob. The instrument panel emits a sound when this is done. The chirp indicates that the fuel-filler lid and door lid are locked. The setting can also be altered to ensure that the doors and lids of the fuel-filler lock automatically without having to press a request switch.

Step 8: Enter your 8-digit Transmitter Number.

Note down the first series of 8-digits and keep it in your wallet. Then, sit in the driver's seat, shut the doors and turn the key in the first position. After ten turns your instrument panel should sound once.

Then, you need to open the case for the key fob and look for the transmitter circuit board inside. The circuit board should be able to display one or two 8-digit numbers. Follow the steps in the guide to register the code. For older models, this procedure may require a visit the dealer.